A windmill is a machine that is powered by the energy of the wind. It is designed to convert the energy of the wind into more useful forms using rotating blades or sails. The term also refers to the structure it is commonly built on. In much of Europe, windmills served originally to grind grain (hence the “mill” derivation), though later applications included pumping water and, more recently, wind generation of electricity. Contemporary electricity-generating versions are referred to as wind turbines.
In northwestern Europe, the horizontal-shaft or vertical windmill (so called due to the dimension of the movement of its sails) dates from the last quarter of the 12th century in the triangle of northern France, eastern England and Flanders. Joseph Needham states that the earliest known reference came in 1191 by a Dean Herbert of East Anglia, who supposedly competed with the mills of the abbey of Bury St Edmunds. These earliest mills were used to grind cereals. The evidence at present is that the earliest type was the post mill, so named because of the large upright post on which the mill’s main structure (the “body” or “buck”) is balanced. By mounting the body this way, the mill is able to rotate to face the (variable) wind direction; an essential requirement for windmills to operate economically in North-Western Europe, where wind directions are various. By the end of the thirteenth century the masonry tower mill, on which only the timber cap rotated rather than the whole body of the mill, had been introduced. In the Netherlands these stone towerlike mills are called “round or eight-sided stone stage mills, ground-sailers (windmills with sails reaching almost down to the ground), mound mills, etc.” (Dutch: ronde/achtkante stenen stelling molens, grond-zeilers, beltmolens, etc.). Dutch tower mills (“torenmolens”) wind turbines are always cylindrical (such as atop castle or city wall towers). Because only the cap of the tower mill needed to be turned the main structure could be made much taller, allowing the sails to be made longer, which enabled them to provide useful work even in low winds. Such mills often have a small auxiliary set of sails called a fantail at the rear of the cap and at right angles to the sails; this rotates the cap through gearing so the sails face into the wind.
